• GentleSlide ^TM Motion Management Oil immersed clutch and electronic clutch which, when properly adjusted, will sense an obstacle to gate travel. Upon sensing an obstacle when the gate is closing, the operator will move the gate to the open position. Sensing an obstacle upon opening will cause the gate to stop. The gate will not move again until an external activation signal is received.
• Continuous duty operation
• Internal limit switches
• “Soft Stop” on opening (except partial opening) and closing
• 1/2 hp motor . Manual release (non-keyed standard)
• Selectable delayed opening and closing (to allow for warning light activation)
• 230 VAC

The Model 820  is shown here with chain (left) and rack & pinion (right) configurations. The chain configuration also shows the slide gate installation kit.