The Model 9050 operator is designed to operate vehicular slide gates in residential applications only. The operator is designed so that it can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operator can be pad or post mounted to meet any installation requirements.
Features
- Self-adjusting, no maintenance magnetic limits.
- Ports for plug-in loop detectors.
- Two convenience outlets.
- Fail-safe release (fail-secure optional).
- Programming switches.
- Built-in reset switch.
- Built-in power On/Off switch.
Specifications
- Maximum gate length 16-feet.
- Maximum gate weight 500 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
- 1/2 HP limited-duty motor.
- 115 VAC, 4.3 Amps.
- Class I applications.
- Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
- 12″W x 24″H x 11.5″D
No matter what your Slide Gate Operator needs, from design and production, to finishing and installation, we can meet your needs – and have been since 1947. Give us a call at (904) 354-4282 or visit our 5,000 square foot showroom. We look forward to working with you.
