Swing Gate Operators

Here you can edit the background of the section

VIKING MODEL F-1SWING GATE OPERATOR

Simple, clean installation, energy efficient operation, and advanced battery backup function… this operator stands alone in it’s class.

More Information

The Model F-1Swing Gate Operator – Residential and commercial Class I, Class II, Class III, and Class IV Vehicular Swing Gate Operator. The specifications and features of the F-1 gate operator showcase the commitment made in its concept and design. Simple, clean installation, energy efficient operation, and advanced battery backup function… this operator stands alone in it’s class.

Design Features Overview:
Some of the standard features include: 7 year residential and 5 year commercial warranty, UL 325 and 991 listing, fail-safe / fail-secure clutch mechanism, simple limit switch arrangement, 120/220 VAC single phase power source, built in three push button station, built in battery backup capable of 300 cycles in case of power failure, on-board lightning protection, and soft-start / soft-stop with intelligent obstruction detection.

Operational Specifications:
- Operational Voltage … 24 VDC with 1/2 H.P. Motor
- Main Power Source … 120 / 220 VAC Single Phase
- Battery … 7 AmpHr 12 VDC x 2
- Max Gate Capacity … 1200 lbs /12′ or 800 lbs /16′
- Max Operating Speed … 13-16 seconds per 90˚
- Battery Backup … 300 Full Cycles (600 lbs. / 12’ gate)
- Maximum Operational Duty … Continuous Cycle
- Operating Temperature … – 4˚ F to + 158˚ F

VIKING MODEL R-6 SWING GATE OPERATOR

The direct drive mechanism in combination with the adaptable algorithms in the control board set a new standard in residential gate automation.

More Information

The Model R-6 Swing Gate Operator – Residential and commercial Class I Vehicular Swing Gate Operator. Introducing a gate operation with no belts, chains or extra coupling mechanisms. The R-6 swing gate operator is capable of handling gates up to 600 lbs. and 14′ long. The direct drive mechanism in combination with the adaptable algorithms in the control board set a new standard in residential gate automation.

Design Features Overview:
Some of the standard features include: 5 year warranty, UL 325 and 991 listing, fail-safe / fail-secure clutch mechanism, efficient direct-drive gear head motor, simple limit switch arrangement, 120/220 VAC single phase power source, built in three push button station, built in battery backup capable of 400 cycles in case of power failure, on-board lightning protection, and soft-start / soft-stop with intelligent obstruction detection.

Operational Specifications:
- Operational Voltage … 24 VDC with 1/2 H.P. Motor
- Main Power Source … 120 / 220 VAC Single Phase
- Battery … 7 AmpHr 12 VDC x 2
- Max Gate Capacity … 600 lbs /14′
- Max Operating Speed … 13-16 seconds per 90˚
- Battery Backup … 400 Full Cycles (600 lbs. / 12’ gate)
- Maximum Gate Opening … 120˚
- Operating Temperature … – 4˚ F to + 158˚ F

VIKING MODEL G-5 SWING GATE OPERATOR

With its compact, low profile design and the power to support 700 lbs of weight with gate lengths of up to 16 feet, the Viking G-5 will revolutionize the idea of gate operation.

More Information

The Model G-5 Swing Gate Operator – Residential and commercial Class I, Class II, Class III, and Class IV Vehicular Swing Gate Operator. With its compact, low profile design and the power to support 700 lbs of weight with gate lengths of up to 16 feet, the Viking G-5 will revolutionize the idea of gate operation.

Design Features Overview:
Some of the standard features include: 3 year residential and 2 year commercial warranty, UL 325 and 991 listing, adjustable timer for automatic close, a high efficiency power supply, a built in three push button station, a built in battery backup capable of 400 cycles in case of power failure, on-board lightning protection, and an easily accessed key release for manual operation.

Operational Specifications:
- Operational Voltage … 24 VDC with 1/2 H.P. Motor
- Main Power Source … 120 / 220 VAC Single Phase
- Battery … 7 AmpHr 12 VDC x 2
- Max Gate Capacity … 700 lbs. / 16 feet
- Max Operating Speed … 13-16 seconds per 90˚
- Battery Backup … 400 Full Cycles (600 lbs. / 12’ gate)
- Maximum Opening … 120˚
- Operating Temperature … – 4˚ F to + 158˚ F

VIKING MODEL T- 21 SWING GATE OPERATOR

The T-21 is our 1 horsepower heavy duty swing gate operator with battery backup. It is capable of smooth and efficient gate movement of gates up to 1200 lbs. and 20′ long.

More Information

The Model T-21 Swing Gate Operator – Heavy Duty Commercial class I, Class II, Class III, and Class IV Vehicular Swing Gate Operator. The T-21 is our 1 horsepower heavy duty swing gate operator with battery backup. It is capable of smooth and efficient gate movement of gates up to 1200 lbs. and 20′ long.

Design Features Overview:
Some of the standard features include: 7 year residential and 5 year commercial warranty, fail-safe / fail-secure clutch mechanism, simple limit switch arrangement, clam shell cover design, 120/220 VAC single phase power source, built in three push button station, built in battery backup capable of 100 cycles in case of power failure, on-board lightning protection, and soft-start / soft-stop with intelligent obstruction detection.

Operational Specifications:
- Operational Voltage … 24 VDC with 1 H.P. Motor
- Main Power Source … 120 / 220 VAC Single Phase
- Battery … 7 AmpHr 12 VDC x 2
- Max Gate Capacity … 1200 lbs /20′ or 2000 lbs /12′
- Max Operating Speed … 13-16 seconds per 90˚
- Battery Backup … 100 Full Cycles (600 lbs. / 12’ gate)
- Maximum Duty Cycle … 100% Continuous Cycle
- Operating Temperature … – 4˚ F to + 158˚ F

VIKING MODEL X-390 SWING GATE OPERATOR

This Swing Gate Operator features adjustable timer for automatic closure, high efficiency power supply, a built-in three push button station.

More Information

The X-390™ Swing Gate Operator features adjustable timer for automatic closure, high efficiency power supply, a built-in three push button station, built-in battery backup capable of 800 cycles in case of power failure, and on-board lightning protection. The X-390™ is powered by the V-Flex control board, including speed control and diagnostic LCD display. This aesthetic operator is solar efficient and ready to be powered with  low voltage wiring, allowing versatility of installations. This operator can be mounted directly to a column, making it a very popular option for homeowners that do not have the space for a pad mounted gate opener. The X-390 has UL 325 and 991 safety listings.

MAX GATE CAPACITY: 600 lbs/14'

MAX OPERATING SPEED: 10 - 13 Seconds per 90°

MAX DUTY CYCLE: 100% Continuous Cycle

OPERATING TEMP: -20°F up to 131°F

STRIKE PROTECTION: 10,000 Amps / 20,000 Volts

FAAC USA Model 400 Swing Gate Operator

Hydraulic operator for condominium and industrial swing-leaf gates with single-leaf max. length of 7.00 m (23 feet) Hydraulic operator for swing-leaf gates with single-leaf max. length of 7.00 m (23 feet).

More Information

The Model 400 Heavy Duty Swing Gate Operator is specifically designed for situations needing maximum versatility, such as apartment, subdivision, commercial & industrial, and certain residential applications.Hydraulic operator for condominium and industrial swing-leaf gates with single-leaf max. length of 7.00 m (23 feet) Hydraulic operator for swing-leaf gates with single-leaf max. length of 7.00 m (23 feet)
Use: Condominium/Industrial

Standard Features
- Its power makes it ideal for large, ornate gates
- Perfect for situations needing up to 125 degrees of swing
- Models available with locks in the opened and/or closed positions
- Operator is mounted inside the gate but still allows gate to open to the inside or outside
- A convenient manual release is standard
- The versatile FAAC control panel allows for six operating logics, including garage-door-like operation and a HOLD OPEN function
- A battery back-up unit is available
- Download printed materials

Download printed materials: Model 400 Specs Brochure

FAAC USA Model 402 Swing Gate Operator

The Model 402 Hydraulic Swing Gate Operator is specifically designed for single family residential use.

More Information

The Model 402 Hydraulic Swing Gate Operator is specifically designed for single family residential use.Hydraulic operator for residential swing-leaf gates with single-leaf length of 1.8 m (402 CBC) and 3 m (10 feet) (402 SBS) Hydraulic operator for swing-leaf gates with single-leaf length of 1.8 m (402 CBC) and 3 m ( 10 feet) (402 SBS)
Use: residential


Standard Features
- Designed for basic single family residential use
- Can move a 900 pound gate leaf 90 degrees in 12 seconds
- Hydraulic locking in the opened or closed positions; not both
- A convenient manual release is standard
- A battery back-up unit is available

Download printed materials: Model 402 Specs Brochure

FAAC USA Model 422 Swing Gate Operator

The Model 422 Hydraulic Swing Gate Operator is designed for residential and condominium use.

More Information

The Model 422 Hydraulic Swing Gate Operator is designed for residential and condiminium use.Hydraulic operator for condominium and residential two-leaf swing-leaf gates with single-leaf length of 1.8 m and 3 m (10 feet), with single leaf length of 3 m (10 feet) Hydraulic operator for two-leaf swing-leaf gates with single-leaf length of 1.8 m (422 CBC-CBAC) and 3 m (10 feet) (422 SB), with single leaf length of 3 m (10 feet) (422 SBS).

Standard Features
- Designed for basic single family residential use
- Can move a 900 pound gate leaf 90 degrees in 12 seconds
- Hydraulic locking in the opened or closed positions; not both
- A convenient manual release is standard
- A battery back-up unit is available

Download printed materials: Model 422 Specs Brochure

FAAC USA Model S800H Swing Gate Operator

The Model S800H Hydraulic Underground Swing Gate Operator is designed for residential and light commercial use.

More Information

The Model S800H Hydraulic Underground Swing Gate Operator is designed for residential and light commercial use.24VDC Hydraulic Underground operator for residential swing-leaf gates with single-leaf max. length of 13ft and single-leaf max. weight of 1,300lbs. The model S800H includes a hydraulic manual release and built-in positive stops.
Use: residential/light commercial

Standard Features
- UL991 safety standard compliant
- Powerful and efficient Switching Power Supply
- Easy programming with trimmers and dip switches
- One pushbutton automatic self learning
- Self resetting fuses
- Stand By mode for efficient power use
- Built in battery backup
- Continuous use
- Max weight of leaf (1760 lbs) (800 kg)
- Max width of leaf (13 ft) (4 m)
- Maximum anti-crushing safety and reverse function on obstacle thanks to the magnetic encoder.
- Built-in positive stops.
- HYBRID technology – combines the advantages of hydraulic technology with that of 24V: sturdiness, high performance, reliability over time, speed control.
- Built-in handles for ease of handling and installation.

Download printed materials: Model S800H Specs Brochure

Liftmaster Model LA500 Swing Gate Operator

The LA500 now features full-time AC run operation with battery backup and revision 5.1 firmware.

More Information

Exciting New Product Updates to the LA500
The LA500 now features full-time AC run operation with battery backup and revision 5.1 firmware.Full Time AC Run Operation with Battery Back-Up – AC Run transformer provides constant power to the Operator and utilizes full battery power reserve for operation on battery back up.Switched Accessory Power – Conserves power for when it is needed most to run cycles on battery backup or when running on solar power by turning off any accessories connected to this output 10 seconds after the gate is closed . This feature is in all new production and replacement control boards.

Party Pass – “Gate Hold Open” Feature – This feature is ideal for parties or other events where the gate needs to be held open for a period of time to allow free/easy access to the property. Simply press the reset button with the gate in the open position, and you can conveniently hold it in the open position without having to open the control box.

LiftMaster swing gate operators are built to perform in the most demanding applications. Synonymous with quality, dependability, and award-winning designs that meet or exceed UL-325 safety standards, LiftMaster’s Elite Series is recognized as the undisputed leader in gate operator technology.

The LA500 model is our most advanced residential DC swing gate operator. It is equipped with industry-leading features like MyQ® and Security+ 2.0™ communications, battery backup, and a capacity to handle gates up to 18 feet and 1,600 lbs.
With a network of more than 8,000 professional dealers and 100 years of access experience, it’s no wonder that homeowners trust LiftMaster to provide security and control for their residential applications.

Battery Backup System provides uninterrupted access when the power is out
Provides up to 14 days or 500 cycles on battery backup. Also powers safety and ancillary devices.

Security+ 2.0™ Technology
Our patented Security+ 2.0™ Technology provides two times the range of standard remote controls and virtually eliminates radio interference. An on-board radio receiver is included with the LA500. It holds up to 50 remotes and is compatible with HomeLink® version 4 and higher.

MyQ® Technology
Provides the ability to remotely monitor and activate our gate from anywhere in the world via an Internet-enabled Smartphone or computer.

Standard Features
- Power Management System
        -  Supplies power when needed to operate the gate and conserves power when not in use
        - Provides exceptional standby time and cycles on battery backup
        - 14 days of standby time or 500 cycles on battery backup
- Simple-to-set electronic limit system maintains accurate gate position throughout gate travel
- Bi-part delay: choose from Standard Operation or Synchronized Close
- Plug-in loop detectors
- Fire department compliance: selectable settings allow gate to auto-open upon loss of AC power or battery depletion
- Advanced traffic management control includes Quick-close and Anti-tailgating functions
- Programmable auxiliary relays
- External obstruction sensing; complies with UL325 safety codes
- 2-year warranty

Optional Features
- Photo eyes and reversing edges
- Plug-in loop detectors
- Torroid transformer kit
- Solar package

Liftmaster Model LA400 Swing Gate Operator

The LA400 has a powerful 24VDC motor, which provides exceptional starting torque and features soft start/stop operation. This promotes longer gate and operator life, as well as dependable performance.

More Information

The LA400 has a powerful 24VDC motor, which provides exceptional starting torque and features soft start/stop operation. This promotes longer gate and operator life, as well as dependable performance. The LA400 is capable of operating gates up to 16 feet long and weighing up to 550 pounds.An on-board radio receiver is included with the LA400. Exclusive from Chamberlain®, this provides a single remote control solution for gates and additional access points.


Standard Features
- On-board radio receiver
- DC operator system
- Battery-run system
- Slow start/stop
- Inherent obstruction sensing
- External obstruction sensing
- Control inputs
- Bi-part latch
- Timer to close
- LED indicators
- Electronic limit system
- Keyed manual disconnect
- 2-year warranty

DoorKing Residential & Commercial Swing Gate Operator Model 6050 / 6100

The Model 6050 and 6100 operators are designed to operate vehicular swing gates in residential and commercial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications.

More Information

The Model 6050 and 6100 operators are designed to operate vehicular swing gates in residential and commercial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. The 6100 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.

Features
- Self-adjusting, no maintenance magnetic limits.
- Overlap feature for dual swing gate operation.
- Designed with a built-in primary and secondary entrapment prevention system.
- Ports for plug-in loop detectors.
- Fail-safe release.
- Tamper detect circuit.
- DC Powered convenience open (Option on 6100 only).
- Gate tracker reporting output.
- Programming switches.
- Built-in reset switch.
- Built-in power On/Off switch.

Specifications Model 6050
- Maximum gate width 10-feet.
- -Maximum gate weight 400 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator).
- Swings gate 90 degrees in approximately 10-seconds.
- 1/2 HP limited-duty motor.
- 115 VAC, 4.3 Amps.
- Class I applications.
- Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
- Dimensions (operator only): 13.5″W x 11″H* x 23″D (* Height of operator only. Actual height above ground is determined by which mounting method is used)

Specifications Model 6100
- Maximum gate width 14-feet.
- Maximum gate weight 500 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
- Swings gate 90 degrees in approximately 10-seconds.
- 1/2 HP continuous-duty motor.
- 115 VAC, 5.4 Amps.
- Class I and Class II applications.
- Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
- Dimensions (operator only): 13.5″W x 11″H* x 23″D (**27.75″D with convenience open option) (* Height of operator only. Actual height above ground is determined by which mounting method is used)

DoorKing Commercial & Industrial Swing Gate Operator Model 6300

The 6300 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications.

More Information

The 6300 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation.These operators can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.

Features
- Self-adjusting, no maintenance magnetic limits.
- Overlap feature for dual swing gate operation.
- Designed with a built-in primary and secondary entrapment prevention system.
- Ports for plug-in loop detectors.
- Two convenience outlets.
- Fail-safe release.
- Tamper detect circuit.
- DC Powered convenience open (optional).
- Gate tracker reporting output.
- Programming switches.
- Built-in reset switch.
- Built-in power On/Off switch.

Specifications Model 6300 with 1/2 HP Motor
- Maximum gate width 18-feet.
- Maximum gate weight 700 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
- Swings gate 90 degrees in approximately 15-seconds.
- 1/2 HP continuous-duty motor.
- 115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
- Class I, II, III and IV applications.
- Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator. Your professional - - DKS system installer can provide you with more details on these devices and on current industry safety standards.)
- Dimensions (operator only): 16.25″W x 13.5″H* x 32 “D (* Height of operator only. Actual height above ground is determined by which mounting method is used)

Specifications Model 6300 With 1 HP Motor
- Maximum gate width 22-feet.
- Maximum gate weight 800 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
- Swings gate 90 degrees in approximately 15-seconds.
- 1 HP continuous-duty motor.
- 115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
- Class I, II, III and IV applications.
- Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator. Your professional - - - DKS system installer can provide you with more details on these devices and on current industry safety standards.)
- Dimensions (operator only): 16.25″W x 13.5″H* x 32 “D (* Height of operator only. Actual height above ground is determined by which mounting method is used)

DoorKing Commercial & Industrial Swing Gate Operator Model 6500

The 6500 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications for both single and bi-parting gates.

More Information

The 6500 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications for both single and bi-parting gates. The unique design of this operator allows for easy access to the electronics and mechanical areas of the operator without ever having to remove the gate arm. This simplifies installation and maintenance. The electronic magnetic limits will never wear out or break and they are easily adjusted. The solid steel frame and belt driven gear box make this operator one of the quietest on the market today. These operators can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.


Features
- Adjustable, no maintenance magnetic limits.
- Overlap feature for bi-parting swing gate operation.
- Simple connection for secondary operator in bi-parting applications.
- Selectable shadow/reverse loop function.
- Magnetic lock power provided.
- Ports for plug-in loop detectors.
- Three 115 VAC convenience outlets.
- DC Powered convenience open (optional).
- Gate tracker reporting output.
- Programming switches.
- Built-in reset switch.
- Built-in power On/Off switch.


Specifications
- Maximum gate width 18-ft. (1/2 HP) or 22-ft. (1 HP).
- Maximum gate weight 700 pounds* (1/2 HP) or 800 pounds* (1 HP). (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
- Swings gate 90 degrees in approximately 12-14 seconds.
- 1/2 or 1 HP continuous-duty motor.
- 115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
- Class I, II, III and IV applications.
- Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices are required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
- Dimensions: 18.38″W x 31.63″H x 23.25″D

Here you can edit the background of the section

DoorKing Commercial & Industrial Swing Gate Operator Model 6550

The 6550 operator is designed to operate very large vehicular swing gates in commercial and industrial applications. Secondary operators are used in bi‐parting (dual) gate applications , and cannot be used as a stand‐alone device.

More Information

The 6550 operator is designed to operate very large vehicular swing gates in commercial and industrial applications. Secondary operators are used in bi‐parting (dual) gate applications , and cannot be used as a stand‐alone device.The 6550 operator is designed to operate very large vehicular swing gates in commercial and industrial applications. Secondary operators are used in bi‐parting (dual) gate applications , and cannot be used as a stand‐alone device.

Features
- Adjustable, no maintenance magnetic limits.
- Overlap feature for bi-parting swing gate operation.
- Simple connection for secondary operator in bi-parting applications.
- Selectable shadow/reverse loop function.
- Magnetic lock power provided.
- Ports for plug-in loop detectors.
- Three 115 VAC convenience outlets.
- Gate tracker reporting output.
- Programming switches.
- Built-in reset switch.
- Built-in power On/Off switch.
- Secondary unit includes 50 Ft cable.


Specifications
- Maximum gate width 25-ft.
- Maximum gate weight 2000 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
- 115 VAC. High Voltage Kit allows the operator to be powered from 208, 230, 460 or 575 source voltage. In dual gate applications, only one (1) kit is required (secondary operator DOES NOT require a high voltage kit).
- Class I, II, III and IV applications.
- Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices are required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
- Dimensions: 20.5″W x 38.5″H x 30″D

Hysecurity Swing Smart DC

Designed to integrate easily with other HySecurity products for a complete gate automation solution, the SwingSmart DC features digital control for the utmost versatility.

More Information

Key Features

- Design: Cast steel housing and oval telescoping universal arm designed for safety and easy installation
- Reliable: Keep gates moving after power loss up to 300 cycles with standard batteries and 1,200 cycles with extended batteries
- Programmable: Field programmable to specific site requirements
- Connected: Optional HyNet™ enables real-time system security alerts

Hysecurity Swing Smart CNX

SwingSmart CNX is the most capable of its kind and the first to offer a robust smartphone app to simplify installation.

More Information

Key Features

- Advanced: Brushless DC motor technology, solid state limit sensors, and direct drive power train for superior control
- UPS: Standard battery backup to keep gates moving up to 300 cycles after power loss
- Programmable: Over 70 user configurable settings to meet site specific requirements
- Connected: Bluetooth connectivity for easy setup and HyNet technology for remote monitoring, maintenance

Hysecurity HyrdaSwing

Maximum capabilities in a low profile hydraulic design, perfect for ornamental or industrial swing gates and high wind applications.

More Information

Key Features

- Powerful: Up to 15,000 lbs per leaf
- Gentle: Soft-start, soft-stop
- Reliable: UPS backup with optional AC Power Supply w/HyInverter AC™
- Programmable: Field programmable to specific site requirements